If you are planning any work on a commercial building, it’s essential that you know what asbestos surveys are and how they work. Older buildings, especially those built before 1980, may still contain asbestos in some materials. A professional survey can give you the answers you need and help you keep your building clean and safe.
Below, this asbestos removal company in Schaumburg, Illinois is going to explain the four main types of asbestos surveys you may need, and what each one is used for.
Management survey
A management survey is the most common type of asbestos survey, and it is usually done in buildings that are still in use, like offices, stores, or warehouses. The goal is to keep an eye on things and make sure nothing dangerous goes unnoticed while the building is still operating.
During this survey, certified technicians inspect known problem areas like insulation, ceilings, and flooring to find any asbestos-containing materials (ACMs).
This survey is not meant to be disruptive. If technicians see something that looks suspicious, they might take a small sample to test it, but nothing is torn apart. It is primarily about maintaining records of existing materials and making sure that they remain in good condition.
Refurbishment or demolition survey
This survey is much more thorough. It is required before any work that could disturb hidden asbestos, like tearing down walls, replacing old plumbing, or gutting interiors.
Because asbestos can be inside walls or above ceiling tiles where no one can see it, your asbestos removal company in Schaumburg, Illinois will need to physically open those areas and check. It can be disruptive, but it is necessary. Skipping this survey puts workers and anyone nearby at risk of inhaling dangerous fibers if asbestos is disturbed.
Federal and state laws require this survey to be completed before any demolition or renovation work in a commercial building. Once asbestos is found, it must be documented. It must then be safely removed by trained professionals.
Re-inspection
If asbestos was found in your building before but left undisturbed (for example, sealed or covered), it still needs to be checked again later. That is what a re-inspection is for.
Certified technicians return to the building and re-examine those same areas closely. They will check for any signs of trouble like water stains, cracks, peeling, or crumbling. Even materials that were once safe can become hazardous if they start to fall apart or wear down.
Everything from the inspection is recorded. If any damage is found, technicians will take the next step. That could mean sealing the area again, doing a small repair, or fully removing the material.
The frequency of re-inspections depends on your building and its usage. Some places only need it every three years, while others may need it done once a year.
Targeted or screening surveys
Sometimes, you don’t need a full building survey. If a single area is damaged or under renovation, like a broken ceiling tile or a roof repair, you can do a focused inspection. That is called a targeted or screening survey.
Instead of inspecting the whole property, technicians test only the materials in question. If those samples test positive for asbestos, you will know exactly what needs to happen next.
An experienced asbestos removal company in Schaumburg, Illinois can help you decide if this lighter option is enough, or if a more comprehensive survey is necessary.
Looking for an Asbestos Removal Company in Schaumburg, Illinois?
If you suspect your property may need asbestos testing or removal, don’t wait. And if you are looking for a certified asbestos removal company in Schaumburg, Illinois that can handle it for you, Axis Response Group is the top choice. Contact us today at (773) 427-6811 to schedule a safe, certified evaluation.
0 Comments